Unpacking & Preparation - DESKY DUAL MINI Guide D'utilisation

UNPACKING
It is important when you receive your DESKY that all
frame components are carefully removed from the
packaging and inspected for shipping damage.
Please report any damage to us immediately so we
can rectify this for you as quickly as possible.
PREPARATION
Check the parts list in this manual to ensure that all necessary components
have been received. The DESKY Dual Sit Stand Desk components are
shipped in two (2) seperate shipping boxes.
If you have also ordered a desktop from us we recommend leaving this in its shipping
box until it is needed to avoid any damage to the surface finish.
Remove all desk frame components from the packaging and lay on a non-abrasive
surface like a carpet or rug. Contact with hard and/or abrasive surfaces may cause
damage to the finish of the desk frame. Count all pieces before disposing of any
packaging material.
Before assembly, consider where you want your desk to be located. You will need a
clear, dry indoor area to set up and assemble your desk. All the necessary tools to
set up your DESKY frame are included for easy assembly.
NOTE: If you have not purchased a desktop from us with threaded screw
inserts or pre-drilled holes you will need a Phillips head screwdriver or
power drill to fix the frame to your desktop.
UNPACKING AND
PREPARATION
6