DESKY DUAL MINI Guide D'utilisation page 11

ASSEMBLY
INSTRUCTIONS
Step 5
Slide the two Crossbar rails (B) into the two Crossbar ends (A) to connect the frame
assembly.
Ensure the crossbar rails are orientated so the rail cut-outs face inward as shown.
B
A
Step 6
Place your desktop upside down on a non-abrasive surface like a carpet or rug and
place the frame on top. Adjust the width of the frame by pulling the two halves
apart to line up with the pre-drilled holes or threaded screw inserts in the desktop.
11