DESKY DUAL MINI Guide D'utilisation page 18

Maximum and Minimum Height Limits
The default height range of the desk is from 60cm up to 125cm to provide the widest
possible height range that will best suit a user's ergonomic seated or standing
position.
The controller can be programmed to set maximum and minimum height limits
if you require. This may be neessary if you need to avoid hitting objects above or
below the desk at specific heights.
Note: if previous preset heights fall outside new limits set these will need to be
reprogrammed, otherwise the preset will just move to the maximum/ minimum set.
Setting a Maximum Height Limit:
1. Press and hold the UP or DOWN button to raise or lower
the height of the desk to the required maximum height.
2. Press the 'M' button once. The display will show 'S-' and
immediately press the UP button once. The display will
show 'S-' and flash.
3. Press and hold the 'M' button until the display shows '999'.
The maximum height limit has now been set.
Setting a Minimum Height Limit:
1. Press and hold the UP or DOWN button to raise or lower
the height of the desk to the required minimum height.
2. Press the 'M' button once. The display will show 'S-' and
immediately press the UP button once. The display will
show 'S-' and flash.
3. Press and hold the 'M' button until the display shows '000'.
The minimum height limit has now been set.
Removing Maximum and Minimum Limits:
1. Press the 'M' button once. The display with show 'S-'.
2. Press and hold the 'M' button again until the display shows
'555'.
3. The Maximum and Minimum Limits and now been removed.
PROGRAMMING
CONTROLLER
18