Please read the Safety Instructions at the start of this manual
before proceeding.
Height UP
Height DOWN
Desk Reset Procedure
You will need to RESET the desk prior to first use.
1. Press and hold the DOWN button until the desk reaches its
lowest position.
2. Press and hold the DOWN button again for 10 seconds until
the display reads 'RST'. Note This will look like 'ASr' on the
display.
3. Press and hold the DOWN button again until the desk lowers a little bit more
and then slightly rises. Release the DOWN button, the desk will display the
height and is now ready for use.
Basic Operation - Up & Down
Press and hold either the UP or DOWN button to raise or lower the height of the
desk. Release the button to stop at a particular height or until the desk reaches its
upper or lower limit.
Memory Presets
OPERATING
CONTROLLER
Store Memory
USB Charge Port
16