Do not open any desk component or insert any object in a desk component.
Risk of electric shock. Opening any desk component will void the product
warranty.
Keep fingers and all body parts clear of the moving desk and all moving
components. Risk of crush injury and bodily injury.
The desk's anti-collision system is premised on proper operation by the
user and observation of all directions in this manual. It is not a system
that will avoid collisions under all conditions as different impacts may or
may not cause the system's sensors to activate.
The desk's electric motors require a duty cycle of 10%. A 2 minute on, 18
minute off duty cycle is required based on a continuous motor run time.
Not observing the correct duty cycle can over heat the motors and reduce
their lifespan.
Do not expose desk components to liquids. In case of spilled liquids,
immediately unplug the desk. Risk of desk failure or electric shock if desk
components become wet.
In the event of a power outage/ surge or if the power cord is unplugged, a
manual reset may be necessary - please see the troubleshooting section.
PRODUCT USE / LIABILITY
Prior to operating this desk for the first time, users must ensure that all components
have been assembled as directed in this manual and that all cables are connected
to the control box before it is connected to a power outlet.
Users must inspect all components and cables to ensure there are no signs of
damage. Do not operate if there are signs of damage.
This desk is height adjustable so that it can be best positioned to suit a user's
ergonomic height as directed in this manual. Any other use is at the user's risk.
Under no circumstances does the manufacturer accept warranty claims or liability
claims for damages caused from improper use or handling of the desk frame.
SAFETY INSTRUCTIONS
5