DESKY DUAL MINI Guide D'utilisation page 19

Controller Safety Lock
The controller can be locked to prevent any undesired or accidental activation of
the
controller and desk. This is recommended when children are present.
To lock the controller: simply press and hold the 'M' button for
10 seconds until the display shows 'LOC'.
To unlock the controller: press and hold the 'M' button for 10
seconds until the display returns to show the current desk height.
Display Height CM/Inches
The controller display height can be programmed to show height in centimetres
or inches.
To change display height between cm/inches:
1. Press and hold the DOWN button until the desk reaches its lowest position.
2. Press and hold the DOWN button again for 10 seconds until the display reads
'RST'.
3. Press and hold the '2' button for 5 seconds. The display will
show '10.3' - this is the default for height in centimetres.
4. To switch to display the height in inches press the '2' button
again for 5 seconds until the display shows '10.4'. You can use
the '2' button to switch back and forth between each setting.
5. Press and hold the DOWN button again until the desk lowers a
little bit more and then slightly rises. Release the DOWN button,
the desk will display the height and is now ready to use.
PROGRAMMING
CONTROLLER
19