Selecting Power & Cook Time; Quick 30 Feature; Keep Warm Feature - Panasonic NN-SE284S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IP4871_3BL70CP_Eng_27_140603:IP3677_38Q04CP_00_110608.qxd 2014-6-3 9:43 Page 13
Selecting Power
Example: To cook at P 6 (mEDIUm) power for 1 minute 30 seconds
1.
Press 5 times.
2.
Swipe
3.
tap
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
NOTES:
1. For more than one stage cooking, repeat steps 1 and 2 for
each stage of cooking before touching Start Key. the maxi-
mum number of stages for cooking is 3. When operating,
two beeps will sound between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (hIGh) power for the first stage, you
may begin at step 2.
3. When selecting P10 (hIGh) power, the maximum program-
mable time is 30 minutes. For other power levels, the maxi-
mum time is 90 minutes.
4. For reheating: use P10 (hIGh) for liquids, P7 (MeD-hIGh)
for most foods and P6 (MeDIuM) for dense foods.
5. For defrosting, use P3 (MeD-LOW).
DO NOT OvER COOK. this oven requires less time to cook
than an older unit. Over cooking will cause food to dry out and
may cause a fire. a microwave oven's cooking power tells you
the amount of microwave power available for cooking.
& Cook Time
• tap Power Level until the desired
power level appears in the display
window.
• Set cooking time by tapping "+"/"-" or
swipe the slider bar to 1 minute and
30 seconds.
• touch Start.
Cooking will start. the time in the
display window will count down.
Power Level
P10 (hIGh)
P9
P8
P7 (MeD-hIGh)
P6 (MeD)
P5
P4
P3 (MeD-LOW)/DeFROSt
P2
P1 (LOW)

quick 30 feature

this feature allows you to set or add cooking time in 30 second
increments up to 5 minutes.
To Set Cooking Time:
1.
• touch quick 30 until the desired
cooking time (up to 5 minutes)
appears in the display window. Power
Level is pre-set at P10.
2.
• touch Start.
Cooking begins and the time will count
down. at the end of cooking, 5 beeps
sound.
NOTES:
1. If desired, you can use other power levels. Select desired
power level before setting cooking time.
2. after setting the time by using the quick 30 key, you
cannot use slider bar.
3. quick 30 key can be used to add more time during manual
cooking. Check the Display Window to verify the additional
cooking time.

Keep Warm feature

this feature will keep food warm for up to 30 minutes after
cooking.
Example: To keep 2 cups of gravy warm
1.
• touch Keep Warm.
2.
• Set warming time, up to 30 minutes.
Swipe
3.
• touch Start.
Keep Warm will start. the time in
the display window will count down.
NOTES:
Keep Warm cannot be used in combination with sensor or
auto features.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nn-se284bNn-se284w

Table des Matières