empasa Klemm-Markise Instructions De Montage Et D'utilisation page 40

Assembly
Step 7:
Into each top part of the stand
and secure it with a screw
Use spanners for this.
Select the grid height here that comes closest
to the distance between the ceiling and the
floor, which you have you defined/measured in
Step 1.
Step 8:
Attach the hand crank 9
and screw tight.
Step 9:
Attach the clamp awning from above left and right to the
height adjuster 5 .
Temporarily tighten the clamp awning.
40
4 , insert a height adjuster
14 and nut 15 .
to the pre-mounted clamp awning
5
5
4
5
5
14
15
4
9
5
V1/2021-30314