Tools Needed; Tools Needed For Installation - empasa Klemm-Markise Instructions De Montage Et D'utilisation

Tools needed

Tools needed for installation

Warning
Using tools carelessly or using improper tools may lead to
injury. De-energise cables from the power supply at the installation site/mounting
position.
Power drill
A
Drill (appropriate to the substrate and the installation material)
B
Pencil/marker
C
Phillips screwdriver
D
SW7 and SW13 spanner
E
IMPORTANT!
Other tools may be necessary depending on the situation.
Choose the type of drill appropriate for the substrate.
The mounting material shown in these instructions is not suitable for all substrates.
The mounting material must be adapted to the existing substrate by the installer.
The installer alone is liable for ensuring that the mounting material is suitable for the respective ma-
sonry and that the installation is carried out professionally.
Depending on the surface, it may be necessary to replace supplied mounting material with another
suitable material.
V1/2021-30314
A
B
C
D
E
35