General Information; Description Of The Clamp Awning - empasa Klemm-Markise Instructions De Montage Et D'utilisation

General Information

Description of the clamp awning

The clamp awning is operated by hand winch. Fig. 1 shows an extended clamp awning.
Figure 1 for illustrative
purposes only
The clamp awning frame essentially consists of a metal frame, the awning fabric and a device for extension and retraction.
Metal frame: Consists of a support frame, which is made up of the drop arms
parts of the stands 3 and the height adjusters
The materials used are resistant to wear caused by use and weathering, assuming normal conditions of use
and
Mediterranean climates.
The manufacturer/product identification can be found on the height adjuster
30
The mounting material must be adapted to the exist-
ing substrate by the installer.
The installer alone is liable for ensuring that the
fixing material is suitable for the respective masonry
and that the installation is carried out
professionally.
5
Depending on the surface, it may be necessary to
replace supplied mounting material with another
suitable mounting material.
6
4
3
5 .
Warning
6 , the upper parts of the stands
5 components.
4 and the lower
V1/2021-30314