Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Cleaning and maintenance
4.1 Cleaning
WARNING: Never use gasoline,
A
solvent, abrasive cleaning agents,
metal objects or hard brushes to
clean the appliance.
A
WARNING: Never immerse the
appliance or its power cable in water
or in any other liquid.
1. Switch off and unplug the appliance.
2. Use a damp and soft cloth and a little amount
of soft cleaner in order to clean the exterior of
the appliance.
4.2 Cleaning the filters
WARNING:
A
that both filters and appliance are
completely dried before installing
the filter to the appliance.
WARNING:
A
cleaning agents and do not touch
unnecessarily the delicate filter
surface.
C
White coating of the HEPA filter
shall become paler in time. This
is normal and does not affect the
performance of the filter.
1. Use a small brush (not included in this model) to
clean the outer surface of the HEPA filter. Thus,
you can remove the rough part of the dust.
2. Wash the filter in warm water.
3. Lightly tap across the filter to remove excessive
water. Repeat this 4 times and wait until it is
dried by itself. Do not use any heating device
for drying.
Vacuum cleaner / User manual
4.2.1 Filter care
1. Dust and dirt blocking the filters should always
2. All filters should be cleaned at least after every
Always
ensure
4.3 Cleaning cyclone assembly
Do
not
use
and dust container
1. Press the dust container opening button (7)
2. Empty the dust container (4) if it is filled with
3. Open the dust container cover (6) by turning
WARNING: Low suction power
A
or damage to the appliance may
occur if the filters of this appliance
are not cleaned.
WARNING: We advise you to
clean Hepa filter regularly (e.g.
A
after every two operations or in a
shorter time). If the suction power is
low, please clean the filters before
operating the appliance.
be cleaned.
two operations and should be replaced every 6
months or a year due to the usage conditions of
your vacuum cleaner.
to remove the dust container (4) and remove
the dust container by holding from the dust
container handle (5).
dirt.
it counter-clockwise. Remove the cyclone
assembly (18), foam filter (20) and motor
protection filter (19).
9 / 67 EN
Publicité
Table des Matières
Dépannage
