Cleaning And Care; Emptying The Dust Container - Beko VCM 71602 AD Mode D'emploi

4

Cleaning and care

Switch off and unplug the appliance before
cleaning it.
WARNING: Never use gasoline,
A
solvent, abrasive cleaning agents,
metal objects or hard brushes to
clean the appliance.
4.1 Dust indicator
If the dust container is full or the hose or the tube
is blocked by a large item such as a sock and thus
the suction is prevented, the dust indicator next
to the on/off button lights red.
WARNING: If the dust container
is empty, this means that a large
A
item (such as a sock) is stuck in the
hose or the tube and thus the air
flow is blocked. In such cases, switch
off the appliance and check the
components.
4.2 Emptying the dust
container
1. Press the dust container removal button (2) to
remove the dust container (5) and remove the
dust container.
2. Push the dust container removal latches
located at the back of the dust container (5)
from both sides.
• Open the dust container (5) cover and empty
the container.
3. When you have emptied dust, close the dust
container cover (5); a click sound will be heard.
4. Insert the dust container (5) back into its
location.
Vacuum Cleaner / User Manual
4.3 Cleaning the cyclone
separator
1. Press the dust container removal button (2) and
remove the dust container.
2. Press the opening button for the motor
protection filter (MIF) housing (8) and open the
cover.
3. Remove the motor protection filter (MIF)
located inside.
4. After removing the motor protection filter,
you will see the metal handle on the cyclone
separator. Holding this handle, remove the
cyclone separator from the dust container (5).
5. Clean the cyclone separator and the dust
container (5) compartment with a soft brush
and wipe them with a damp cloth.
A
WARNING: Cyclone separator
should not be immersed in water.
9 / EN