Use; Intended Use; Installation Of The Vacuum Cleaner; Attaching / Detaching The Dust Container - Beko BKS 1350 T Manuel D'utilisation

3

Use

3.1 Intended use

The appliance was designed to be used in houses,
and is not fit for industrial use.
3.2 Installation of the vacuum
cleaner
1. Insert the hose assembly into the air intake of
your vacuum cleaner. Flexible hose (16) shall be
seated with a click.
2. Insert the wide end of the telescopic tube (15)
to the other end of the flexible hose (16).
3. Install the adjustable parquet/carpet brush (14)
to the telescopic tube (15).
Vacuum cleaner / User manual
3.2.1 Attaching / Detaching the
dust container
1. Unplug the appliance.
2. Press the dust container opening button (7)
to remove the dust container (4) and remove
the dust container by holding from the dust
container handle (5).
3. Ensure that the upper cover (6) is seated firmly
when the dust container is placed correctly.
Dust container
removal button

3.3 Operation

Pull out the power cord in the required length
before plugging in the appliance to the mains.
C
Always pull out at least two thirds
of the cord to prevent the power
cord from overheating during the
operation of the appliance.
C
Cord should be pulled out between
the yellow and red signs on the cord
ideally.
WARNING: Never pull out the
A
power cord beyond the red mark.
Pulling out the cord beyond the red
mark may damage the appliance.
1. Plug in the power cord (8) to a suitable mains
supply outlet.
2. Press on the on/off button (1).
Dust container
carrying handle
on/off
button
7 / 67 EN