Beko BKS 1350 T Manuel D'utilisation page 10

4 Cleaning and maintenance
4. Wash the cyclone assembly (18) in warm water,
if required. Wait until the cyclone assembly is
dried.
5. Clean the dust container (4) with a damp cloth,
if required.
6. Replace the cyclone assembly (18), foam filter
(20) and motor protection filter (19) in their
places and close the upper cover so that it is
seated with a click.
7. Make sure that all components are completely
dried before installing all components to the
appliance and switching on the appliance.
A
WARNING: Dry the filters
outdoors. Never use any source of
heat to dry the filters.
10 / 67 EN
8. To remove the dust blocking the filter, gently
tap the hepa output filter on a hard surface.
Wash the filter in warm water.
9. Lightly tap across the filter to remove
excessive water.
10. Repeat this process 4 times and wait until it
is completely dried by itself naturally. Do not
use any heating device for drying.
Vacuum cleaner / User manual