Cleaning And Care; Cleaning The Filters; Replacing The Dust Bag - Beko VCC 61605 AF Mode D'emploi

4

Cleaning and care

Before cleaning your appliance, turn off and
unplug.
WARNING: Never use gasoline,
A
solvent, corrosives, metal objects
or hard brushes for cleaning your
appliance.

4.1 Replacing the dust bag

When your dust bag is full, all icons on the display
and on the touch control panel (1) will start to
flash simultaneously. Replace the dust bag.
1. Open the upper cover (8) by pressing the button
for opening the dust container (7).
2. Remove the dust bag from the bag holder by
pulling it from its tray.
3. Dispose the full dust bag.
4. Holding its tray, push the new dust bag into the
bag holder. Ensure that it is fully seated.
5. Close the upper cover (7) of the appliance.
A
WARNING: Do not force the
upper cover (7) to close it, otherwise
the plastic parts can be damaged.
WARNING: Dust bags not
purchased from authorized dealers
or services are not original. Such dust
A
bags have a lesser quality and they
become torn in a shorter period and
render your appliance inoperable.
Faults caused by using unauthentic
dust bags are not covered by the
scope of the warranty.
10 / EN
A
WARNING: Do not wash a dust
bag.

4.2 Cleaning the filters

Motor Sponge filter
protection
filter
After 5 dust bag replacements (this number varies
depending on the usage frequency and area),
clean the filters.
While you empty the dust accumulated in the
dust container to clean the container, you need to
clean the motor protection filter, the foam filter
and HEPA filter as well.
WARNING: For drying filters,
A
do not use appliances such as
hairdryers, stoves or other sources
of hot air.
WARNING: Do not mount back
the filters before they are dried
A
properly; otherwise a smell of
humidity may disseminate on the
air, water may splash from the rear
part or filters may get damaged.
A
WARNING: Put the filters back
to their original place when they are
dry.
Vacuum Cleaner / User Manual
HEPA filter