Safety Features - Royal Sovereign HFN-02 Mode D'emploi

OPERATION
1. Unwind the power cord and plug in unit. Turn the Thermostat Setting clockwise to increase and maintain selected
temperature. At this setting, the thermostat will automatically maintain the desired temperature, meaning that if the
temperature of the area is same as the thermostat setting, the heater will turn OFF. If the temperature of the room drops
below the thermostat temperature, the heater will turn back ON.
2. Turn the Power Control Setting clockwise to the..Position for fan, "1" position for heating selection with low power. "11"
position for heating selection with maximum power.
3. Turn the Power Control Setting to 'position to turn the unit OFF.
4. Unplug the unit to turn the power OFF.

SAFETY FEATURES

This heater has a built in safety features including overheat protection.
TIP-OVER SAFETY FEATURE
This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically
shut the heater off. Once the heater is restored an upright position, the heater will reset.
OVERHEAT SAFETY FEATURE
This heater is equipped with a overheat safety feature. When the heaters internal components reach a certain temperature
that could cause overheat and possible fire, the heater will automatically shut off.
WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug
may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician
to inspect the original outlet for damage.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to
repack the unit.
-5-
HFN-02