Trouble Shooting - FLORABEST FAH 18 B2 Traduction Du Mode D'emploi D'origine

GB

Trouble Shooting

Problem
Appliance
won't start
Intermittent op-
eration
Blades become
hot
Bad trim
52
Possible cause
Battery (9) discharged
Battery (9) not inserted
Safety switch (4) not
pressed properly
On/Off switch (7) defective
Internal loose contact
On/Off switch (7) defective
Blades (2) are blunt
Blades (2) are notched
Too much friction due to
lack of lubrication
Too much friction due to
missing lubrication
Knife bar (2) dirty
Knife bar (2) blunt
Bad cutting technique
Battery not fully charged
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
Turn on (see "Operation")
Send in to Service Centre for repair
Send in to Service Centre for repair
Have the blades sharpened or re-
placed (Service Centre)
Have the blades checked or replaced
(Service Centre)
Oil the blades
Lubricate knife bar
Clean knife bar
Grind or have knife bar replaced
(Service Centre)
See ("Working with the hedge trim-
mer")
Recharge battery (see "Charging")