The speed is shown on the display.
To increase speed, touch the button 4.
To decrease speed, touch the button 5.
To switch the light on/off touch the button 1.
Turbo level
When the hood is switched on at the 4th speed (turbo mode), after 5 minutes of work the hood
automatically switched to the 3rd speed.
Timer / off timer
To activate timer simultaneously touch the buttons 4 and 5 while switching the fan on. The timer time
will be flashing and the timer time will be shown on the display for 10 seconds.
To change the timer work time, touch the button 4 (to increase) or 5 (to decrease) while the display
is flashing.
The timer time is changed from 15 to 90 minutes.
The number of selected speed will appear on the display in 10 seconds.
To switch off the timer change the speed, or turn off the fan.
Remote control
The remote control controls the corresponding functions. Buttons 4 and 5, as well as button 1 turn on
the hood. Button 1 turns off the hood during operation. Button 2 turns the light on or off. With button
6 one can activate the timer and set it as described above. Button 3 does not work on this unit (no
automatic mode).
Cleaning and care
- De-energize the device to clean it.
- Clean the outer parts with mild soapy water. Avoid hot cleaners, brushes, or scrubbing cloths.
- Conventional glass cleaner can be used for the glass surfaces.
It is important to follow the filter changes and cleaning intervals. Failure to comply
Disposal of the transport packaging
The packaging protects the device against damage during transport. The packaging materials are
selected to be environmentally friendly and recyclable.The return of the packaging into the material
cycle saves raw materials and reduces waste. Your seller will take back the packaging.
Packing parts (e.g., foils, styrofoam) can be dangerous to children. There is danger of suffocation!
Keep packaging parts out of reach of children and dispose them as soon as possible.
can be a fire hazard as a result of fat deposits.