Cleaning In The Dishwasher; Cleaning By Hand - Gurari GCH I 331 PRIME Manuel D'installation

and thus reduced power.

Cleaning in the dishwasher

The grease filters of your hood are dishwasher safe (55 ° C). However, light discoloration of the metal
can arise. These have no influence on the function of the grease filter and are not considered a
reason for complaint. Put the filters loosely in the dishwasher. Do not bend or pinch them. NOTE: Do
not clean very dirty grease filters together with other dishes.

Cleaning by hand

If cleaned manually, first soak the grease filter extensively in hot rinse liquor, then brush well and
above all, rinse well with clean water. After that drain well. Avoid use of aggressive, acidic or alkaline
detergent. For very stubborn dirt you can resort to commercially available degreaser sprays.
Usage
Extractor hoods with a touch switch have 4 ventilation speeds. Depending on the volume of
evaporation when cooking, you can select low, middle or high ventilation level.
The touch switch of the operation modes of the motor and lighting lams is located on the
decorative glass of the extractor hood:
0 - Infrared sensor
1 - Light on/off
2 - Fan on/off
3 - Operating mode indicator
4 - Speed increase
5 - Speed decrease
Waiting mode turns on as soon as the extractor hood is connected to electricity.
You can select motor speed, switch lamps and activate function "fan timer" with the help of switch
just touching the relevant symbol-button. Display (3) reflects the number of selected speed or time.
To switch the fan on touch the button 2, 4 or 5.
To switch the fan off, touch the button 2.
While switching on the fan will work with the speed, selected before switching off.