Cleaning And Care - Gurari GCH T 466 PRIME Manuel D'installation Et D'utilisation

Usage
The field on the far left switches the LED lighting on and off again.
The control takes place via a 3-stage sensor control on the front panel of the extractor hood. 1, 2 and
3 turn on the engine at the appropriate power level. Touch again the lighted power level switches the
motor off again.
Turbo level
When the hood is switched on at the 3th speed, after 5 minutes of work the hood automatically switched to
the 2rd speed.
Timer / off timer
The extractor hood has a switchable automatic off timer (5 min). To activate this, keep the desired
power level pressed for 5 seconds. After that the timer activates automatically and turns off the
engine and lights after 5 minutes.
Remote control
The remote control controls the corresponding functions. Buttons 4 and 5, as well as button 1 turn on
the hood. Button 1 turns off the hood during operation. Button 2 turns the light on or off. With button
6 one can activate the timer and set it as described above. Button 3 does not work on this unit (no
automatic mode).

Cleaning and care

- De-energize the device to clean it.
- Clean the outer parts with mild soapy water. Avoid hot cleaners, brushes, or scrubbing cloths.
- Conventional glass cleaner can be used for the glass surfaces.
It is important to follow the filter changes and cleaning intervals. Failure to comply
Lighting
can be a fire hazard as a result of fat deposits.
Power levels