Safety Instructions; Possible Misuse - Orgapack OR-P 400 HD Mode D'emploi Et De Sécurité

3
klsf klsd
lksdf kl
kl sdllk kl sd
fkl klk kl sdaf
asdf klk kl kl
ksldafk kl kl
kl klkl sdaf lk
kl kl klkl l lk
6 8 10
4 12
2 14
max bar 0 16
12.07/WE

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating in-
structions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is ten-
sioned. The strap could
break!
Caution:
Danger of squeezing!
Do not put your fi ngers
into the tension wheel
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process.
Do not exceed the air
pressure!
Do not exceed the re-
commended air pressure.
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling.
Original
ORGAPACK
Use for the intended purpose
This pneumatic tool is intended for strapping fl at
packages, pallet loads etc.
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool is designed for use with polyester (PET)
straps.

Possible misuse

The use of steel straps is not possible.
ORGAPACK OR-P 400 HD
Do not use a bottled
air or gas source!
Do not operate this tool
by using a bottled air or
gas source
Caution:
If work is carried out
using a spring balancer,
only a spring balancer
that complies with the
safety regulations may
be used.
Original ORGAPACK
spare parts must be
used exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
15