Safety Instructions - Orgapack OR-V 40 P Mode D'emploi

3
jklsfjklsdj
lksdfjkl
jkljsdllkjjkljsd
fkljjklkjkljsdafj
asdfjklkjjkljklj
ksldafkjkljkl
jkljklkljsdafjlkj
jkljjkljklkljljlk
6 8 10
4 12
2 14
0 16
max.6 bar
08.00/WE

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating
instructions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap
forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is
tensioned. The strap
could break!
Caution:
Danger of squeezing!
Do not put your fingers
into the sealing area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process.
Do not exceed the air
pressure!
Do not exeed the
recommended air
pressure.
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling.
Original
ORGAPACK
Original
ORGAPACK
Use for the intended purpose
The sealer is intended for sealing seals for steel
straps. It is used for strapping round, heavy packages.
This sealer was designed and manufactured for safe
handling during the strapping operation.
The sealer processes steel straps only.
Possible misuse
The sealing of seals for plastic straps is not possible.
ORGAPACK OR-V 40 P
Do not use a bottled
air or gas source!
Do not operate tis tool
by usining a bottled air
or gas source.
Caution:
If work is carried out
using a spring balancer,
only a spring balancer
that complies with the
safety regulations may
be used.
Original ORGAPACK
seals must be used
exclusively.
Original ORGAPACK
spare parts must be
used exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
11