Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LOCK NUTS
23
3 3/4" BOLTS, LOCK NUTS,
HAND TIGHT
25
3 3/4" BOLTS, LOCK NUTS,
HAND TIGHT
26
UPPER LEG
WITH HAND
HOLD
3 3/4" BOLT, LOCK NUT
28
PLATFORM (continued)
PLATFORM
3. Attach the last Platform Section next. Slip it over the two exposed
SECTION
bolts and secure using
(PN 82073.400)
hand tight for now.
4. Position one of the Platform Stand-Offs as shown in figure 24.
Slide the stand off between the platform sections.
5. Secure using one
now.
6. Repeat for the other two center holes using
nuts. See figure 25.
24
7. Insert two more Platform Stand-Offs as shown in figure 26. These
two stand-offs go on the back side of the Platform - furthest away
from the Upper Leg that has a hand hold.
8. Secure these stand-offs with two
9. Attach the Upper Ladder Assembly next. Slide the Ladder
Assembly between the front two platform sections as shown in
figure 27.
10. Secure at the upper location only using one
nut
as shown in figure 28.
11. GO BACK AND WRENCH TIGHTEN ALL BOLTS FROM
STEPS 1 - 10. DOUBLE CHECK BOLTS TO ENSURE THEY
ARE PROPERLY FASTENED!
27
lock nuts
as shown in figure 23. Leave these
3 3/4" bolt and lock
3 3/4" BOLT, LOCK NUT,
HAND TIGHT
PLATFORM
STAND-OFF
(PN 82073.500)
3 3/4" bolts and lock
UPPER LADDER
ASSEMBLY
(PN 82073.200)
nut. Leave hand tight for
3 3/4" bolts and lock
nuts.
3 3/4" bolt and lock
PG 9
Publicité
Table des Matières
