7
MAINTENANCE AND CARE
•
The powdercoat finish applied at the factory is very durable and
should only need touch ups in areas of heavy wear or accidental
impact. Use a high quality, outdoor spray paint to cover any bare
metal areas that might develop. Inspect the stand before use, every
time. DO NOT use if any corrosion (rust) is present.
•
When transporting your Summit Treestand be sure it is securely tied
down and be sure no other objects can slide into or hit the treestand
possibly causing damage.
•
Never leave the stand assembled and exposed to outside conditions
for more than two weeks.
Should you damage any part of your Summit Treestand, contact your nearest authorized Summit dealer or the factory to obtain the
proper corrective action procedure and/or replacement parts for the treestand.
Summit Treestands have the highest structural integrity by design, material selection and manufacturing techniques, but as its owner,
only your continued care will assure trouble free performance. When the above-mentioned guidelines are followed, your Summit
Treestand will provide years of successful hunting.
8
LIMITED WARRANTY
(A) Warranty
Summit Treestands, LLC (Summit) warrants to the original retail purchaser that all products manufactured by it are free from defects in
material and manufacture at the time of shipment for twelve (12) months from the date of purchase. Summit will repair or replace any
part found defective if the unit claimed to be defective shall be returned to Summit, postage prepaid, within the warranty period.
This warranty shall not apply to any product which has been subjected to misuse; misapplication; neglect (including but not limited to
improper maintenance); accident; improper installation; modification (including but not limited to use of unauthorized parts or attachments);
adjustment or repair. THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED (INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS OF ANY PRODUCT FOR A PARTICULAR PURPOSE), AND OF ANY OTHER OBLIGATION OF LIABILITY ON THE
PART OF THE COMPANY.
(B) Limitation of Liability
It is expressly understood that Summit's liability for its products, whether due to breach of warranty, negligence, strict liability, or otherwise,
is limited to the repair of the product, as stated above, and Summit will not be liable for any other injury, loss, damage, or expense, whether
direct or consequential, including but not limited to loss of use, income, profit, or damage to material, arising in connection with the sale,
installation, use of, inability to use, or the repair or replacement of Summit's products.
Summit reserves the right to make alterations or modifications in its products at any time, which in its opinion, may improve the
performance and efficiency of the product. It shall not be obligated to make such alterations or modifications to products already in service.
Please take the time to fill out the warranty card online at http://www.summitstands.com/warranty
!
CAUTION
Look for nicks, gouges, cuts, cracks, bends, corrosion or
similar damage that can be the result of improper use
or accidental damage. For instance, this could occur if
someone else used the treestand without knowledge of
its proper use, or if the treestand were dropped, hit by
a motor vehicle or subject to corrosive conditions, etc.
PG 19