Before First Use; Intended Use; Attaching The Auxiliary Handle; Inserting/Changing The Disc - Westfalia 87 39 54 Mode D'emploi

Before first Use

Remove the angle grinder and the accessories from the
packaging. Keep packaging material out of reach of children.
There is risk of suffocation!

Intended Use

This machine is intended for normal cutting, grinding, sharpening
and polishing work. Do not use it or modify it for any other
purpose! The grinder uses grinding discs with a maximum
diameter of 125 mm and a maximum circumferential speed of
80 m/s.

Attaching the Auxiliary Handle

Do not operate the angle grinder without the auxiliary handle (3).
There are two threaded mounting holes in the transmission
housing (for left-handed and for right-handed persons), one in
each side, to which the auxiliary handle can be attached.

Inserting/Changing the Disc

Important!
connect the power plug from
the socket before changing
the grinding disc to avoid
accidental starting.
1. Clean the disc seating
flange and the flange nut
of all grinding residue.
2. Mount the grinding disc as
shown on the picture.
Attach the
according to the used
disc.
Operation
Always dis-
flange nut
Cutting Disc
35
Spindle Lock Button
Prot. Cover
Inner Flange
Flange Nut