Westfalia 87 39 54 Mode D'emploi page 14

ments of the wrong size cannot be shielded and controlled
properly.
 Discs, flanges, and other attachments must precisely fit the
spindle of your electric tool. Tool bits which do not precisely fit
the spindle turn irregularly, vibrate and can cause loss of
control.
 Do not use attachments which have been damaged in any
way. Check attachments such as grinding discs for missing
bits and cracks. If the tool or the attachment has been
dropped, check it for damage or use an undamaged item.
After the attachment has been checked and attached, please
keep yourself and other persons out of the rotating area of the
attachment and let the machine run at full speed for one
minute. Most damaged attachments and tools will fail within
that time.
 Wear personal protective equipment. If necessary and
depending on the application, wear full face protection,
eye protection, or safety goggles. If necessary, wear a
dust mask, ear protection, safety gloves or a safety
apron which protect you from flying fragments. The
eyes must be protected from flying debris, which are
generated by various operations. Dust must be filtered
by the dust mask or breath protection. If you are exposed to
high levels of noise for extended amounts of time, your hear-
ing may be damaged.
 Keep other persons at a safe distance from your working
area. Persons entering your working area must wear personal
protective equipment. Fragments of the work piece or the
attachment may be thrown away and cause injuries outside
the immediate working area.
 Hold the tool only by the isolated handles while undertaking
work during which the tool or the attachment can touch hidden
Safety Notes
10