Safety Notes - Westfalia 87 39 54 Mode D'emploi

Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, damage
or physical injury:
 Please read this manual carefully and use the unit only
according to this manual.
 Dispose of used packaging material carefully or store it out of
the reach of children. There is a danger of suffocation!
 Make sure the voltage corresponds to the type label on the
electric tool.
 The unit is designed for operation in altitudes of up to 2000 m
above sea level.
 Persons with limited physical, sensorial or mental abilities are
not allowed to use the electric tool, unless they are supervised
and briefed for their safety by a qualified person.
 This angle grinder can be used as a grinder, and angle
grinder. Please note all safety advice, descriptions and data
supplied with the electric tool. Disregarding these notes may
lead to electric shock, fire and/or serious injury.
 This angle grinder is not suitable for use as sander, with a
wire brush, or as polisher. Using the tool in ways not intended
by the manufacturer is dangerous and can cause injury.
 Do not use attachments which are not especially designed for
this device and recommended for this device by the manufac-
turer. The fact that an attachment can be physically attached
to the tool does not ensure safe operation.
 The maximum allowed speed for an attachment must be at
least as high as the no load speed noted on the electric tool.
Attachments spinning faster than allowed may be destroyed.
 Outside diameter and thickness of the tool bit must corre-
spond to the dimensions stated on your electric tool. Attach-

Safety Notes

9