Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• In mode other than "BT" (ex. USB, AUX mode), music is played only in MAIN Sound Tower and music
is not played in SUB Sound Tower.
• The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary.
• This product does not support aptX audio stream with Stereo Group mode.
• If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode
may fail.
Terminate the Stereo Group mode
Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds while the Stereo Group is
connected.
• Tone prompt and the LED above the ADD STEREO button is off.
LED Indications
LED
STATE
Blink
Green
Solid
Red
Solid
Using Samsung TV and Stereo Group mode
Connect two Sound Tower by wire and use them with Samsung TV to enjoy stereo sound.
1. Connect two sound towers via stereo mode by press the ADD STEREO button on the two Sound
Tower.
2. Connect the RCA cable to the AUX2 OUT on the MAIN and AUX2 IN on the SUB as shown by using
the RCA cable (not supplied).
3. In "BT" mode, press the "AUX" button on the MAIN Sound Tower remote control for at least 5
seconds. The LED blinks on the ADD STEREO button.
Waiting for a Stereo Group connection.
The Stereo Group connection is successful.
There is an error with the Stereo Group connection.
Left Sound Tower
(MAIN)
ENG - 10
Description
Right Sound Tower
(SUB)
Publicité
Table des Matières
