Rothenberger ROMAX 4000 Instructions D'utilisation page 19

1 Safety Notes
FCC-Statement (Class A, Group 1)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Statement
NOTE – This equipment has been tested and found to comply with the limits for a Class A ,
Group 1 digital device, pursuant to Part 15 of the FCC Rules. These limit values were designed
to provide adequate protection against faults occurring during operation in industrial areas. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
Class A, Group 1 Note
Warning – This is a Class A, Group 1 product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
1.1 Intended use
The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information must be
observed.
ROMAX 4000:
The ROMAX 4000 is designed exclusively for the use of pressing jaws manufactured by
ROTHENBERGER or that have been declared suitable by ROTHENBERGER.
The device and the press jaws are designed exclusively for crimp fittings, for which the corre-
sponding pressing jaws have been designed. Any other or additional use shall be deemed im-
proper.
ROTHENBERGER cannot accept any liability for the resultant consequences and damage, nor
for the use of pressing jaws from other manufacturers, neither for damage caused by these
pressing jaws.
Proper usage also includes compliance with the operating manual, compliance with the inspec-
tion and servicing conditions and adherence to all the relevant safety regulations.
The ROMAX 4000 is a handheld electric machine and must not be used for stationary applica-
tions.
This device may only be used correctly as described.
Charger and battery:
The chargers are only suitable for charging ROTHENBERGER battery packs.
This tool is not designed for use by persons with physical, sensory or mental disabilities, or with
insufficient experience and/or knowledge, unless they are supervised by a person responsible
for their safety, or have received instructions on how to use the tool by this person.
Never attempt to charge batteries that are not rechargeable. Danger of explosion!
The battery packs are designed for use in corresponding ROTHENBERGER battery-operated
power tools. They must only be charged using ROTHENBERGER chargers. To select the ap-
propriate device, please contact your ROTHENBERGER dealer. Read the relevant instructions
for the devices used.
1.2 General Power Tool Safety Warnings
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for future reference.
ENGLISH 13