Safety; Specific Safety Advice; Installation; Motor Preparation - SOMFY Pergola io Notice

Pergola io

2. SAFETY

Specific safety advice

ISwitch off the mains supply for the awning before performing any service operation in the vicinity.
To avoid damaging the product:
1) Never immerse it in liquid!
2) Avoid impacts!
3) Do not drop it!
4) Never drill holes in it!
5) Avoid moving the awning if ice has formed on it.

3. INSTALLATION

The Pergola io must be installed in a location sheltered from
inclement weather.

3.1. Motor preparation

1) Fit the crown (A) and the drive wheel (B) to the motor.
2) Measure the length (L1) between the interior edge of the
motor head and the outer rim of the drive wheel.

3.2. Tube preparation

1) Cut the roller tube to the required length.
2) Deburr the roller tube and remove the swarf.
3) For smooth roller tubes, cut a notch with the following
measurements:
- e = 4 mm
- h = 28 mm.
44
5069577C107-Pergola_io.indb 44 5069577C107-Pergola_io.indb 44
Copyright © 2010-2022 Somfy Activités SA, Société Anonyme. All rights reserved.
1 2
OFF
3 4
5 6
1
A
2
L1 = ...
L1
1 2
Ø > 47
3
e
B
h
18/05/2022 18:46:24 18/05/2022 18:46:24