Setting the Access Point Manually
1
Check SSID or Network Key for a Wireless LAN
Router/Access Point.
• Check the label on the Wireless LAN router.
2
Press .
3
Select <Network Settings>, and then press
4
Select <Wireless LAN Settings>, and then press
If a screen appears asking whether to enable the wireless
LAN, select <Yes>, and then press
5
Read the message that is displayed, and then press
.
6
Select <SSID Settings>, and then press
7
Select <Select Access Point>, and then press
SSID Settings
Select Access Point
Enter Manually
8
Select a wireless LAN router.
If multiple matched SSIDs are displayed, select the ID that
is listed fi rst (the one with the strongest signal).
9
Enter the network key.
Enter the network key using the numeric keys.
Select <Apply>, and then press
WEP Key (5-26 Char.)
XXXXXXXX
En
<Apply>
Entry Mode: A
10
Select <Yes>, and then press
11
After the <Connected.> screen is displayed, wait
until the Wi-Fi indicator stops blinking and turns on.
12
Wait approximately 2 minutes after the
connection.
IP address is set during this period of time.
12
.
.
.
.
.
Following the instructions on the screen, set the paper size
and type.
.
.
If an error message appears:
Press
to close the screen, check whether or not the
network key is correct, and then retry the settings.
If the access point cannot be detected even after
retrying, see the following.
User's Guide "When an Error Message Appears"
To set IP address manually:
User's Guide "Connecting to a Wireless LAN"
For details on the installation procedures:
Install the driver and software using the provided DVD-
ROM.
You can also download the driver from the Canon website.
For details on the installation procedures, see the MF Driver
Installation Guide.
For macOS users:
The DVD-ROM supplied with this machine may not include
the printer driver for macOS. This is diff erent depending
on when you purchase the machine. Please fi nd and
download the appropriate driver on our Canon homepage.
For further information on installation or using the driver,
see the manual for the driver.
Setting a Paper Size and Type
Paper Settings
MP Tray
Drawer 1
1
Select Frequently Us
...