Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Gaggenau RB 282 Mode D'emploi

Appliance self-test

Your appliance features an automatic self-test
program which shows you sources of faults which
may be repaired by customer service only.

Starting the appliance self-test

1. Switch off the appliance with the On/Off
button ÿ and wait 5 minutes.
2. Switch on the appliance with the On/Off
button ÿ.
3. Within the first 10 seconds, press and hold the
freezer compartment "fast" button h for 3 to 5
seconds until an audible signal sounds.
The self-test programme starts. While the self-test
is running, a long audible signal sounds in the
meantime.
If 2 audible signals sound and the set temperature is
displayed after the self-test has ended, your appliance
is OK.
If, at the end of the self-test, 5 audible signals sound
and the freezer compartment "quick" button h flashes
for 10 seconds, there is a fault. Inform customer
service.

Ending the appliance self-test

When the programme has ended, the appliance
switches over to normal operation.
44

Customer service

Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service with
the appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.

Repair order and advice on faults

Contact information for all countries can be found
on the enclosed customer service list.
GB 0344 892 8988
IE 01450 2655
US 877 442 4436
E - Nr
FD - Nr
Calls charged at
local or mobile
rate.
0.03 € per
minute at peak.
Off peak 0.0088
€ per minute.
toll-free