Technical Features Of The Multifunctional Module - GF 546 Manuel D'utilisation

Instruction manual

4 Technical Features of the Multifunctional Module

Adapter Plate for Actuators
The housing is made completely of
polypropylene. It is screwed
directly on the valve. The inner
contour of the multifunctional
a
module is asymme­trical and fits
unmistakably on the respective
outer contour of the ball valve
housing.
Selection of 5 potted limit
b
switches.
The multifunctional module is
screwed directly on the ball valve
c
housing with 4 stainless steel Torx
screws.
The switching disc made of ABS
d warrants the precise switching
point.
Functions:
 Interface for mounting actuations
 Feedback unit in combination with actuators
 Also for manual valves – with multifunctional handle
 Mechanical interface for back wall panel mounting
Technical Features of the Multifunctional Module
Multifunctional Module
e Snap-on cover.
Plugs as an additional safety device to
f
prevent undesired opening of the cover.
Connector plug 3P+E for fast and easy
g
cable mounting – protection rating: IP65
Clamps to fasten the adapter plate on
h
the multifunctional module with
stainless steel Torx screws.
Cover
11