Publicité
Les langues disponibles
Les langues disponibles
R TEX
Start and stop
♦
SOFSTART
Slightly press the start and stop device to activate
SOFSTART, in order to get a good grip on the
surface from the beginning.
♦
ON
Continue to press the start and stop device all the
way down to activate full power of the pneumatic
breaker.
♦
OFF
Stop the pneumatic breaker by releasing the start
and stop device. The start and stop device will
automatically return to the stop position.
Operating
Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
© 2015 Construction Tools PC AB | No. 9800 1724 71 | 2015-12-20
Original instructions
Safety and operating instructions
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool does
not get stuck.
Breaking
♦
Let the machine do the work; do not press too
hard.
♦
Avoid working in extremely hard materials for
example granite and reinforcing iron (re-bar) which
would cause substantial vibrations.
♦
Any form of idling, operating without insertion tool
or operating with an uplifted machine must be
avoided.
♦
When the machine is lifted, the start and stop
device must not be activated.
♦
Check regularly that the machine is well lubricated.
When taking a break
♦
During all breaks you must place the machine in
such a way that there is no risk for it to be
unintentionally started. Make sure to place the
machine on the ground, so that it can not fall.
♦
In the event of a longer break or when leaving the
workplace: Switch off the power supply and then
bleed the machine by activating the start and stop
device.
Maintenance
Regular maintenance is a basic requirement for the
continued safe and efficient use of the machine.
Follow the maintenance instructions carefully.
A
19
Publicité
