Altas Copco R TEX Prescriptions De Sécurité Et Instructions Pour L'opérateur page 14

Safety and operating instructions
Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
R TEX is a range of hand-held, pneumatic breakers
designed for medium to heavy demolition of materials
such as concrete, asphalt and brickwork. The
pneumatic breakers are designed for vertical use.
No other use is permitted.
Recommended insertion tools are listed in the spare
parts list.
Choosing the correct breaker
for a task
It is important to choose the correct size of breaker
for the work to be performed.
A breaker that is too small means that the work will
take longer.
A breaker that is too large means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of breaker
is that a normal sized piece of broken material should
be removed from the workpiece within 10–20
seconds operation.
● If it takes less than 10 seconds a smaller breaker
should be selected.
If it takes more than 20 seconds a larger breaker
●
should be selected.
14
Main parts
I
F
A
Air inlet
A.
B. Lubricator
Oil plug
C.
D. Handle
Silencer
E.
Trigger (start and stop device)
F.
G. Tool retainer
Cylinder
H.
Top cover
I.
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels must be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
© 2015 Construction Tools PC AB | No. 9800 1724 71 | 2015-12-20
R TEX
C
D
B
E
H
G
Original instructions