GYS NOMAD POWER PRO 700 Mode D'emploi page 9

Masquer les pouces Voir aussi pour NOMAD POWER PRO 700:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
All manuals and user guides at all-guides.com
Translation of the original instructions
NOMAD POWER PRO 700
Remove personal metal items like rings, bracelets, necklaces, etc. When
using the products
Do NOT drop unit. If unit receives a sharp blow or is otherwise da-
maged in any way have it checked by a qualified battery technician.
Do NOT use the unit to jump start a vehicle while charging the internal
battery.
lf this unit is leaking liquid dispose of at proper recycle facility imme-
diately.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-circuiting.
Class II device (charger booster)
Class III device (booster)
• If the power supply cable is damaged, it must be replaced by the
manufacturer, its service agent or an equally qualified person.
• Under no circumstances should solvents or other aggressive cleaning
agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations :
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
Disposal:
• This product should be disposed of at an appropriate recycling facility.
Do not dispose of in domestic waste.
• The battery must be removed from the device before the latter is
discarded.
• The device must absolutely be disconnected from the power supply
network before removing the battery.
• Product contains lithium based battery, at end of product life dispose
of product according to local regulation.
EN
9

Publicité

Table des Matières
loading

Table des Matières