Setting A Clip Motion; Clipmotion - Sony MEX-5DI Mode D'emploi

Notes
• You can set the image format as follows:
JPEG: 1,600 × 1,200 dots or less
BMP, GIF, PNG: 640 × 480 dots or less
• You can preview up to 100 images from a folder
within a "Memory Stick" at one time.
• The following folders in a "Memory Stick" cannot be
displayed.
– CONTROL
– DCIM
– MSSONY
– VOICE
– HIFI
• In step 7 or 9, if there is no image data, "No Picture"
is shown in the display.
• Depending on the volume of stored data, the storing
time differs. Do not turn off the unit while the
message in step 17 is displayed. If you turn off the
power, the data will not be stored.
• If the capacity of the unit is not enough, "MEM FULL
– delete data" is displayed and you cannot store the
data. After deleting the data (page 37), perform the
settings again.
Tips
• You can store a maximum of 100 jacket pictures in
the unit.
• If "Cyber-shot" is selected in step 8, the folder is
selected automatically.

Setting a clip motion

— ClipMotion (Standard mode)
You can store your favorite GIF image or GIF
animation file for each source and display them
in the source display area in the Standard mode.
The image data you set will be stored in this unit.
1
Insert a "Memory Stick" (page 12).
2
Select a source (radio, CD, MD, MS, or
AUX) that you want to set a clip
motion.
3
Press (GRAPHIC).
4
Press < or , repeatedly to select

"ClipMotion."

Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
5
Press (ENTER).
6
Press M or m to select "Memory Stick."
If you want to change the display type of a
previously stored image, select
"FlashMemory."
7
Press (ENTER).
If you select "FlashMemory" in step 6, skip to
step 8.
8
Press M or m repeatedly to select a
location or type of image that you want
to set.
Picture Select: If an image you want to set
is in the first layer of a "Memory Stick,"
select this.
Cyber-shot: If you want to set a picture
taken by an optional Sony digital still camera
Cyber-shot, select this.
(Folder name): When a folder is in a
"Memory Stick," the folder name is
displayed.
9
Press (ENTER).
Select the folder name in step 8. If there are
images in folders of a lower layer, repeat step
8 and 9 to select the folder which contains
your desired image.
An image can be set in up to the 5th layer
folder in a "Memory Stick."
continue to next page t
35