Toro TimeMaster 76cm Manuel De L'opérateur page 31

1. Blade (2)
4. Tighten the second blade; refer to step 2.
5. Rotate the blades by hand a full 360° turn to
ensure that they do not touch.
Note:
If the blades touch each other, they are
not mounted correctly. Repeat steps
3, until the blades no longer touch each other.
WARNING
Incorrectly installing the blades could damage
the machine or cause an injury to you or
bystanders.
Use care when installing the blades.
Figure 43
1
g016536
through
29