Toro TimeMaster 76cm Manuel De L'opérateur page 18

Shutting Off the Engine
Standard Model
Press the toggle switch
position and hold it until the engine shuts off.
Figure 18
Electric-Start Model
1. Turn the ignition key to the O
Figure 19).
2. When the engine shuts off, remove the ignition
key and take it with you when you leave the
machine (B of Figure
Figure 19
Engaging the Blades
When you start your engine, the blades do not turn.
You must engage the blades to mow.
(Figure 18) to the S
TOP
position (A of
FF
19).
1. Pull the blade-control-bar lock back to the
blade-control bar
1. Blade-control bar lock
2. Slowly pull the blade-control bar back to the
handle (Figure
g234921
3. Hold the blade-control bar against the handle
(Figure 21).
Disengaging the Blades
Release the blade-control bar
g234920
Important:
When you release the blade-control
bar, the blades should stop within 3 seconds.
If they do not stop properly, stop using your
machine immediately and contact an Authorized
Service Dealer.
16
(Figure 20).
Figure 20
2. Blade-control bar
20).
Figure 21
(Figure 22).
Figure 22
g016484
g193334
g193345