Parts Identification - PRO-POINT 8354649 Mode D'emploi

V 3.05
3. Use special care when working on corners, sharp edges or
flexible material. Corners, sharp edges or bouncing have a
tendency to snag the rotating accessory.
4. Only use accessories designed for the tool.
USE AND CARE OF TOOL
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. Do not carry the tool with fingers near or on the
trigger/switch.
3. Avoid unintentional starts. Be sure that the regulator/throttle
switch is in the neutral or OFF position when not in use and
before connecting it to any air source.
4. Remove adjusting keys and wrenches from the tool before
operation or connecting it to a power source. A wrench
or key that is left attached to a rotating part of the tool
increases the risk of personal injury.

PARTS IDENTIFICATION

WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
Remove the parts and accessories from the packaging and inspect for
a malfunction and personal injury.
damage. Make sure that all items in the parts list are included.
Contents:
• Angle grinder
• Spanner wrench
• Side handle
8
All manuals and user guides at all-guides.com
5 in. Composite Air Angle Grinder
For technical questions call 1-800-665-8685
8354649