PRO-POINT 8354649 Mode D'emploi page 13

8354649
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or
by-laws for electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a
qualified technician service the tool.
Problems
Tool runs at
normal speed,
but loses power
under load.
Tool runs slowly.
Air flows slightly
from exhaust.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
5 in. Composite Air Angle Grinder
Possible Causes
Motor parts worn. Contact Princess Auto Ltd.
Motor parts
jammed with dirt
particles.
OR
Airflow blocked
by dirt.
Air regulator in
closed position.
Suggested Solutions
for a solution. If unable to do
so, have a qualified technician
service the tool.
1. Check air inlet filter
for blockage.
2. Pour air tool
lubricating oil into
air inlet as per
Lubrication instructions.
3. Operate tool in
short bursts.
4. Repeat above as needed.
If this fails, contact
Princess Auto Ltd. for
a solution.
Open the air regulator to
desired airflow.
V 3.05
13