PRO-POINT 8354649 Mode D'emploi page 5

8354649
GRINDING TOOL PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic.
When working on materials that may contain lead, asbestos,
copper chromium arsenate or other toxic materials, extra care
should be taken to avoid inhalation and minimize skin contact.
1. Only use a grinding wheel that exceeds the maximum RPM of
the tool (see Specifications).
2. Only use a grinding wheel with the correct arbor size and
shape that matches the grinder's spindle.
3. Always ensure the safety guard is attached correctly and do
not operate the angle grinder without the guard attached.
4. Ensure the grinding wheel has a clean edge. Check the
grinding wheel for wear or chipping and replace if necessary.
5. Never install more than one wheel at a time.
6. Hold tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring.
Contact with a live wire will electrify exposed metal parts of
the tool and shock the operator.
7. Before using the tool on the workpiece, run the tool at the
highest speed, without a load, for at least 30 seconds in a
safe position. Stop immediately if there is any vibration or
wobbling that could indicate poor installation or a poorly
balanced grinding wheel. Check the tool to determine
the cause.
8. Do not allow the motor to overload or overheat. Take breaks
to rest the tool.
9. When the machine is in operation, keep hands away from the
grinding area.
10. Do not subject the grinding wheel to any lateral pressure as it
may damage the tool or cause it to kickback.
11. A large amount of sparks will be created when working with
angle grinder. Hold the tool so that sparks fly away from you
and other persons or flammable materials. Keep up to date
fire-prevention safety instructions in the event of a fire.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
5 in. Composite Air Angle Grinder
V 3.05
5