PRO-POINT 8354649 Mode D'emploi page 6

V 3.05
12. Do not place the tool down after use until the grinding wheel
has come to a complete stop. The grinding wheel will not
stop immediately when the machine is turned off.
13. Do not touch the grinding wheel or the workpiece surface
worked on with this tool. They may be hot and could inflict a
burn injury.
14. Do not use a coolant or water with this angle grinder.
15. Do not use as a fixed grinder.
GENERAL SAFETY PRECAUTIONS
VIBRATION PRECAUTIONS
1. This tool vibrates during use. Repeated or long-term
exposure to vibration may cause temporary or permanent
physical injury. Take frequent breaks when using the tool.
2. If you feel any medical symptoms related to vibrations
(such as tingling, numbness and white or blue fingers), seek
medical attention as soon as possible.
3. Wear suitable gloves to reduce the effects of vibration.
4. DO NOT use this tool before consulting a physician if one of
the following applies:
4.1 Pregnant
4.2 Impaired blood circulation to the hands
4.3 Past hand injuries
4.4 Nervous system disorders
4.5 Diabetes
4.6 Raynaud's Disease
AIR TOOL PRECAUTIONS
1. Inspect the tool's airline for cracks, fraying or other faults
before each use. Discontinue use if the airline is damaged
or hissing is heard from the airline or connectors, while
operating the tool. Replace the defective component/airline.
2. Do not allow people, mobile equipment or vehicles to pass
over the unprotected airline. Position the airline away from
high traffic areas, in a reinforced conduit or place planks on
both sides of the airline to create a protective trench.
3. Prevent damage to the airline by observing the following:
6
All manuals and user guides at all-guides.com
5 in. Composite Air Angle Grinder
For technical questions call 1-800-665-8685
8354649