General; Contraindications; Intended Use; Product Description - Etac Swift Mobil-2 Serie Manuel

General

Thank you for choosing an Etac product. In order to avoid damage
during assembly, handling and use, it is important to read this manual
and save it for future reference. You can also find it at
www.etac.com. You can select your language via the "International"
and "Local websites" link. Here you will also find other product
documentation, such as prescriber information, pre purchase guide, and
reconditioning instructions.
In the manual, the user is the person sitting in the chair. The carer is
the person helping the user.

Intended use:

The Swift Mobile 2 family is a range of mobile shower chairs and
toilet chairs (hereafter called the product) intended for indoor use
when performing hygiene tasks for people with restricted mobility.
The product can be used in the shower, at a sink, or over the toilet,
as well as for transfers to and from the hygiene room.
The product is intended for use in home environments and
institutions.
The product is suitable for use in wet areas, but not pools or similar
corrosive environments.
The product is intended to compensate for various types of injuries
or disabilities that limit the mobility of the user.
The product is intended for adult users, generally persons who are
at least 146 cm tall and who weigh at least 40 kg.
The product is not intended for any other use or environment
beyond those stated above.
The product has been tested and complies with the requirements set
out in EN ISO 10993-1 and ISO 17966.

Product description

A1. Bolt, A2. Leg support, A3. Seat, A4. Arm support, A5. Back support upholstery, A6. Item no label (serial no, production date)
A7. Head support
*The product's date of manufacture can be read from the barcode on the product. The number 11 is shown below the barcode in brackets. The
number combination after these brackets is the date of manufacture.

Assembly

Technical data

Warranty / maintenance

5-year guarantee against material and manufacturing defects. For
terms and conditions, see www.etac.com.
Service life 7 years. For complete information regarding the service life
of the product, see www.etac.com.
D1. Clean the product with normal non-abrasive cleaning agents (pH
value of between 5-9). Rinse and dry.
Disinfect the product with an alcohol-based disinfectant, 70%.
The product is otherwise maintenance-free.
D2. The product and its accessories can be safely cleaned at 85°C for
3 minutes (unless otherwise stated). This applies for recondition-
ing.
The product can be reconditioned. Refer to the reconditioning instruc-
tions at www.etac.com.
Constituent materials are resistant to common disinfectants.
The following surface treatment methods have been used to protect
against corrosion:
Lacquered surfaces = Polyester powder coating
Non-lacquered steel surfaces = Fe/Zn-Ni
English
The product conforms to the requirements of the Medical Devices Regula-
tion (EU) 2017/745.
Contra indications:
There are no known contraindications.
This symbol appears in the manual along with text. It
indicates instances where the safety of the user or the
assistant may be at risk.
The images which are referred to on each page are found
at the start of the manual (pages 3 to 11). See Figures A
to J for the corresponding text.
This product should be recycled as per national
regulations.
Item list: = Applies to, = Accessories
See the item list on the right which displays the information applicable to
each product.
Reuse
The product is suitable for reuse. The number of times it can be reused
depends on how often and in which way the product is used. Before
reuse, thoroughly clean and disinfect the product and check its safety
features. If necessary, take remedial action.
Storage
The product should be stored indoors in a dry place at a temperature
above 5°C. If the product has been stored for a long time (more than four
months), its function must be checked by an expert before use.
21
Etac / Swift Mobil / www.etac.com
See Figure A
See Figure B
See Figure C
See Figure D