Fein MKAS 355 Mode D'emploi page 25

Translation of the Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
~ (a. c.)
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Do not touch the rotating parts of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
A surface that can be touched may be very hot and thus hazardous.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European
Community.
Confirms the conformity of the power tool with the directives of Great Britain (England,
Wales, Scotland).
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Switching on
Switching off
Locked
Not locked
Product with basic insulation plus additional insulation on touchable, conductive parts
connected to the protective conductor.
Alternating current
See section "Operating Instructions"
Keep your hands out of the sawing area while the machine is running. Danger of injury in
case of contact with the saw blade.
en
25