Inspection, Care And Maintenance; Warranty Conditions - Altrex MiTOWER Mode D'emploi

12. Inspection, Care and Maintenance

1. Rolling tower parts must be handled and transported with care in order to avoid damage.
2. Storage should be organised in such a way that only undamaged parts, in the correct amounts, are available for assembly
of the rolling tower.
3. Check all moving parts for correct functioning and check that these are not filthy.
4. Check all parts for damage. Damaged, worn-out or incorrect parts may not be used. Replace these parts only with original
Altrex parts. To prevent accidents, these parts must be mounted in the same way as the part that is replaced. Mounting
(fastening) and/or repair are at your own expense and risk. Altrex shall not be liable for damage resulting from erroneous
EN
mounting and/or repair.
5. Rolling towers for professional use must be inspected periodically by an expert.
6. Production code (YY-WW) can be found: braces, on the tubes; frames, on vertical tube; platforms, on inside of beams;
stabilisers, on outer tube.

13. Warranty conditions

Please visit www.altrex.com/warranty to view the clauses of the Altrex warranty.
14. Abbreviations and logos
Abbreviation / logo
WH
PH
KG
KG
L
B
Optional
Indoor use
Outdoor use
Wood
Fiber-Deck®
All rights reserved. No part of this publication may be duplicated, stored in an automated database, or disclosed in any way
or manner, whether electronically, mechanically by photocopying, recording, or in any other way, without prior permission of
Altrex BV Zwolle. This publication may only be used for Altrex products. Misprints and printing errors reserved.
10 www.altrex.com
Meaning
Working height
Platform height
Kilogramme
Length
Width
Optional use
Indoor use
Outdoor use
Wood
Fiber-Deck® light-weight platforms