Mounting - Goobay 71362 Mode D'emploi

User manual
The power cord used should have a minimum cross section of 1.0 mm². The
following connections are made to the terminal block of the product.
1. Connect your lamps like shown.
If using several lamps, they must be wired in parallel.
Fig. 8: Installation
2. Fix all wire connections using a screwdriver.
3. Insulate the connection against contact and moisture.
The earth wire will not be connected.
5

Mounting

• Place and use tools safely.
• Do not keep limbs between shearing parts.
• Pay attention to current-carrying or other
lines, lying behind plaster and do not damage them!
1. Select the mounting place according to the following criteria:
Fig. 9: Mounting place
• The surface must be stable.
15
Risk of falling / Risk of crushing