Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User manual
2
Description and Function
2.1
Product
This product is an infrared motion sensor for indoors and is specified as
installation material. It reacts to heat radiation (infrared radiation) of moving
objects that enter the detection area of the sensor, eg. people and animals,
etc. The sensor must „see" the area which is monitored. Thermal radiation
propagates in a straight line, but is stopped by glass or other solid objects.
Entering the detection area of the sensor switches the connected electrical
consumer on and after a (adjustable) time off again automatically. A built-in
photocell prevents working of the motion sensor during sunlight. In addition,
the ambient brightness can be adjusted by a regulator.
2.2
Product parts
1
Fig. 7: Product parts
1
Switch-off delay
2
Mounting clamps
3
Motion sensor
4
Trip Sensitivity
5
Terminals
2.3
Scope of Delivery
Infra-red motion detector, User manual
General specifications
2.4
Voltage
Standby power
Rated load
13
2
3
2
4
220-240 V~ 50 Hz
≤0.5 W
max. 800 W (incandescent lamps),
max. 400 W (energy-saving lamps)
5
Publicité
Chapitres
Table des Matières
