Mounting; Recessed Mounting - Goobay 71366 Mode D'emploi

6

Mounting

• Place and use tools safely.
• Pay attention to current-carrying or other
lines, lying behind plaster and do not damage them!
• The surface must be stable.
Delivered installation material is only suitable for concrete and stone ceilings.
For mounting on other surfaces, other dowels must be used.
6.1

Recessed mounting

1 plastic, glass or wood panel
1. Drill the mounting hole with a Ø17 mm drill.
2. Mount the light sensor as illustrated.
During the switch-off delay, set on the
motion sensor, the lamp is dimmed to
minimum intensity, but never switches off,
even when sufficient ambient light.
Fig. 19: Function 5.2-3
If no movement is detected, the lamp
automatically switches off according the
set switch-off delay on the motion detector.
Fig. 20: Function 5.2-4
Risk of falling / Material damage
1
Fig. 21: Recessed mounting
18