Installation With Separate Light Switch; Mounting - Goobay 71367 Mode D'emploi

5.2

Installation with separate light switch

Fig. 8: Installation with separate light switch
ON → OFF: The light turns off immediately and can not be switched on for
1 minute, even if motion is detected. After this period, the sensor goes into
automatic mode.
OFF → ON: The light turns on 100 % brightness and then reverts to auto-
matic mode.
6

Mounting

• Place and use tools safely.
• Pay attention to current-carrying or other
lines, lying behind plaster and do not damage them!
1. Select the mounting place according to the following criteria:
• The surface must be stable.
• The product must be attached absolutely straight.
• Plants, street lighting, reflective surfaces or randomly moving
objects must not be located in the detection range.
• The recommended mounting height is 1,5-3,5 m.
Risk of falling / Material damage
Fig. 9: Mounting place
18